
Many homes today are equipped with Wi-Fi networks due to the numerous portable internet enabled devices now available. The need to use these devices anywhere in the house unencumbered has brought the need to have working networks that are strong and capable of handling the data transmission demands of many homes today. Getting the Wi-Fi signal to all corners of the house or room, in its strongest form means that everyone using the network will have satisfactory use of the network at all times. This is something that is mainly dependent on the positioning of the Wi-Fi router. Below we will look at the ways in which you can position your network in the right spot for the best use in terms of signal coverage. Learn to setup Wi-Fi router better today.
Place the Router in a Central Position in the House
The Wi-Fi router spreads its signal on both sides of the antenna. In this case you want it to cover all sides of the room or house without wasting any signal. Placing it in a central location will help spread the signal evenly throughout the space covered. A central location also means that the router should be raised from the ground to a relatively central height above the floor. Placing it on top of a desk will be good enough.
Position it Away from any Obstructions and Interference
To keep your Wi-Fi signal as strong and efficient as possible you will have to position it away from any obstructions in the house. This includes water, glass, walls and cabinets. When Wi-Fi signals are obstructed they get weaker and make it very difficult for users to enjoy the use of a strong signal.
Interfering signals will also weaken the Wi-Fi signal and make it flaky. Put the Wi-Fi router away from the microwave, wireless phones and remote controllers among others. By avoiding any interference you will have a smooth and continuous signal at all times.
Since different hand held internet devices are usually held in different alignments it is important to position the Wi-Fi router antennas in the right way. If you have a router with two antennas position them perpendicularly to each other. This means one will be aligned horizontally and the other one vertically. This will boost the chances of all devices receiving the signal strongly on all floors of the house however they are aligned.