Guides to Self-Repair Your Apple Phone

If you are looking for ways to repair your iPhone. Why not, read further to find out which are the tools to fix your iPhone to make them more efficient and reliable. The most common ones are phone battery fixture as well as the universal display removal fixture is which are both importance and easy to use.

Universal Display Removal Fixture

Instead of using a single suction cup to open the display, a Universal Display Removal Fixture is used to provide a quicker access to the internals of your iPhone without putting all components at risk.

In order to open a gadget for repair, mount the display removal tool with 4 suction cups. These cups help to gently pry the display from the iPhone’s body. All you need to do is, insert your iPhone in this tool and then pop the suction cups down. Now pull a spring loaded lever up and display will open.

Battery Removal

There are many online guides on how to fix your phones or other electronic devices. One of the most popular online guides that you can read up on is iFixit which recommends prying the battery right off adhesive.

You are advised to be patient while pulling out this adhesive strip. Moreover, keep it tight, and slowly pull it all the way around your battery. Furthermore, you should continually pull this adhesive strip towards the bottom of your phone. Avoid pulling the strip too quickly as it can cause breakage.

With the help of black stick, you can easily lift the battery out of your iPhone case. Before removing adhesive, prying your battery off the top can cause damage to any internal components.

After removing the battery, pick extra adhesive strips and apply them to keep your battery in place. You are advised to position the battery adhesive strip in an enclosure, it will help black tab to sit against the speaker at a 90 degree angle.

Speaker Replacement

You can easily replace 7 components such as, receiver, speaker, iSight camera module, SIM ejector tool, battery, display and the vibration motor. The speaker replacement is very straightforward. Simply unscrew broken components and pop in a new one like so.

You are advised to angle the speaker module into the enclosure, same as you pulled it off.

SIM Ejector Tool

Fixing this part is pretty quick and requires only an extra set of tweezers. Simply connect the cable of the battery to a logic board and place your phone in this tool. It will line up your iPhone in preparation for pressure roller to be dropped. Align while marks on the tray of the tool with the front edge of vertical tower. Now lower red lever to move pressure roller into place above the battery.

Finally, slide the tray back through a vertical tower more than once. Pressure roller will secure the battery to a new adhesive strip.

This article posts as a reference and guides to repair your iPhone, you may still want to look for reliable phone repair technician to fix your Apple phone for you.