Convert Black iPhone4 To White

Have you been mad on the fact that you purchased a black iPhone 4 since Apple was having issues making the white model? . Have you been waiting for an answer to help keep your present device and have the skill to change between the two? . If this subject refers to you, look no further, the next article will describe a stepwise strategy on the best way to convert your black iPhone 4 white one. The very initial measure of the conversion is knowing what has to be replaced. The parts that need replacement are the glass screen/lcd unit and the rear cover.

The chassis of the unit is the exact same on the two models. The 2nd step of the fix is acquiring the right tools for the job. The tools required are a phillips screwdriver, a case opener tool, a flat head screw driver, and a great deal of patience. Step by step disassembly instructions are the following! remove the rear cover by removing the two screws on the bottom of the telephone and push upward. Next follow the internal directions below: .

First, remove the sim card holder. Secondly remove the battery by pulling up on the battery tab. Next, remove the buzzer by unscrewing the two screws and lift up. Then remove the 5 screws on top of the telephone and remove the ribbon cap. Lift up on the five tabs connected to the apparatus. Next unscrew the screw near the tabs on top of the motherboard. Next, remove the water indicator in the center of the telephone and remove the screw below it.

Next, remove the two screws holding the metal plate down from the center of the phone. Next remove the metallic plate and remove the cable connected to the motherboard. Next remove the two screws in the bottom of the phone. Next remove the camera tab and then pull up on the camera. Next remove the little connector in the bottom of the iPhone. Then remove the motherboard by pulling up. Then remove the 10 screws holding the screen in. Then use your instance tool for removing the screen from the chassis. Please carry out the last steps at your very own risk.

The phones components are fragile. After the black cap and screen are removed you'll have to prepare your white components. The screen/digitizer/lcd assembly will have to use the net grill from the old screen for the new one. In addition ensure that the rear cover you get has the rail/plastic frame attached to it. After making certain the above steps are completed, assemble the iPhone with white components indicated above. That is a procedure that is tough, but will resolve many frustrations for all those iPhone users who cannot wait around for the white model to be released.